![]() ![]() Note: To do this, a DNS server must of course have been assigned to the INTERNET WAN connection, e.g. With the destination set manually, the loopback address is set according to the loopback configuration.Įxample: AAAA+A request via WAN connection INTERNET Anything that can be specified as a destination in the forwarding table can also be specified as a destination here. It is also possible to send the requests while bypassing the forwarding configuration by specifying the -d parameter. Since the DNS configuration may differ depending on the routing tag, the dnsquery command can be used to append the requested name (or to the requested address in the case of PTR requests) by means of an extension: In the case of a PTR request, the requested IP address must be specified directly and may not be converted in the "ARPA" string:ġ68.82.9.: type PTR, class IN, ttl 5 hours, 32 minutes, 30 seconds, Because the dnsquery command uses the DNS client of the LANCOM device, its behavior is determined by the DNS configuration of the device (i.e. The available types are AAAA, A, PTR, SRV and NAPTR. The type can also be specified explicitly using the option -t. Note: The AAAA-type response is only issued if the IPv6 address can also be reached. with the mandatory domain name only, then a request of type AAAA as well as a request of type A will be issued. If the command is entered without options, i.e. The DNS client switches between servers if one does not respond You can also specify two comma-separated IP addresses (with an optional routing tag) (e.g. As in the forwarding table, a routing tag can also be specified if the forwarding destination is an IP address (e.g. -d : Destination used for reaching the DNS servers.Optional routing tag for reaching the DNS server.-s: Sorts the display of the current directory grouped by sub directories, tables, values, and actions in ascending alphabetical order.ĭnsquery DNS requests.-r: Also lists all subdirectories as well as the tables they contain.The SNMP IDs of the subordinate items can be read from the individual entries. The output begins with the SNMP ID of the device followed by the SNMP ID of the current menu. -a: In addition to the content of the query, this also lists the SNMP IDs.The wildcard symbol * deletes a table, for example, del Config/Cron-Table *.Ĭlears the contents of the persistent boot log memory.ĭisplays the current directory content. Access rights: Supervisor-Writeĭeletes the table row in the current table or the table referenced in the branch of the menu tree with. If indicates a branch of the menu tree, then the option -r (recursive) must be entered. Resets individual parameters, tables or entire menu trees back to their default configuration. All previously entered commands can be viewed by means of the log. Various abbreviations can be used, such as replacing cd. By adding the parameter s, the results or outputs are displayed in the syslog table. Prerequisite for this is that the feature bit (CC-EAL) is set on the device. Prerequisite for this is that the feature bit (CC-EAL) is set on the device.Ĭhecks the conformity of the device to CC-EAL4+. Sets the device configuration to standards-compliant default values with respect to CC-EAL4+ (such as ISDN=off). ![]() Note: For further information on boot configurations refer to the chapter Alternative boot config
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |